Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 559, listelenen: 149-168
-
Effect of heating position on thermal energy storage in cavity with/without open-cell metallic foams
(Taylor and Francis Ltd., 2016)Thermal energy storage systems inherently store heat at different heating positions. In other words, the heat storage performance changes depending on the heating positions. In this study, the effects of the heating surface ... -
Effect of impactor shapes on the low velocity impact damage of sandwich composite plate: Experimental study and modelling
(Elsevier Ltd, 2016)An experimental and numerical analysis of the influence of impactor shapes on the low velocity impact performance of aluminium sandwich composite plates has been carried out. The aluminium composite panels were manufactured ... -
Effect of operational parameters on ultrasonic treatment of baker's yeast effluent
(Sakarya Üniversitesi, 2016)In this study, ultrasound was employed to remove color and chemical oxygen demand (COD) from baker's yeast effluent. An ultrasonic homogenizator with 20kHz frequency was used for this purpose. The effect of operational ... -
Effect of Particle Morphology on Physical, Mechanical and Wear Properties of Cobalt Metal Powders
(Springer India, 2021)Cobalt is used in applications that require high densities and good mechanical properties. Cobalt powder is used in batteries, cemented carbides, stainless steel, machine tools and also in manufacturing of metal matrix ... -
The effect of potassium modification on structural properties and catalytic activity of copper and iron containing SBA-16 catalysts for selective oxidation of ethanol
(Elsevier Ltd, 2019)Copper and iron SBA-16 catalysts were synthesized using hydrothermal method and modified with potassium. XRD patterns showed that characteristic peaks of SBA-16 for all catalysts did not destroy with metal loading. The ... -
The effect of starting material types on the structure of graphene oxide and graphene
(2019)In this study, the effects of starting material types on graphene oxide (GO) are reported with the aim of developing graphene (GR) synthesis. The GOs were prepared from natural graphite (NG) powder and graphite nanoplate ... -
Effect of steam explosion on enzymatic hydrolysis and baking quality of wheat bran
(Academic Press, 2017)In this study, the effect of steam explosion (SE) treatment on microstructure, enzymatic hydrolysis and baking quality of wheat bran was investigated. Coarse and fine bran were treated at different steam temperatures ... -
Effect of surfactant types on the size of tin oxide nanoparticles
(Polish Academy of Sciences, 2017)In this study, tin oxide (SnO2) nanoparticles were synthesized by hydrothermal method in the presence of hydrazine and ammonia by adding surfactant for 12 h in a Teflon autoclave at 100°C reaction temperature. Tin(II) ... -
Effect of swirl generator inserted into a tube on exergy transfer: Decaying flow
(Taylor and Francis Inc., 2014)This study experimentally investigates the effect of conical injector type swirl generator inserts on heat and exergy transfer in a uniform heat flux tube for turbulence regime. One hundred twenty watts of heat are applied ... -
Effect of the activator type and catalyst/activator ratio on physical and mechanical properties of cast PA-6
(2008)The aim of the study is to produce suitable unfilled cast polyamide-6 composition exhibiting optimum mechanical, physical, thermal and electrical properties with anionic polymerization mechanism. Sodium lactamate was used ... -
The effect of TiO2 contained within a titanium silicalite (TS-1) catalyst and on the selective oxidation of ammonia
(Berkeley Electronic Press, 2013)The selective oxidation of ammonia to hydroxylamine using titaniumsilicalite-1 as a catalyst with an increasing content range of 1-2.5 wt% TiO2 was systematically investigated in a batch reactor. The hydroxylamine yielded ... -
Effect of tooth profile modification on wear in internal gears
(IOP Publishing Ltd, 2018)Internal gears are often used in the automotive industry when two gears are required to rotate in the same direction. Tooth shapes, slippage speeds at the beginning and end of meshing are different according to the external ... -
Effect of traditional processing steps on chemical and nutritional composition of leblebi
(Akademiai Kiado Rt., 2017)Turkey's and several Middle East countries' people consume "leblebi", which is a traditional snack food made from chickpea (Cicer arietinum L.). Leblebi processing steps caused significant decrease P<0.05) in moisture and ... -
The effects of ascorbic and cinnamic acid addition and different pasteurization parameters on the inactivation of alicyclobacillus acidoterrestris in apple juice
(2011)In this study, thermal inactivation parameters (z-, F- and D-values) of Alicyclobacillus acidoterrestris DSM 2498 strain, is an acidophilic, spore-forming microorganism that can survive typical pasteurization conditions, ... -
The effects of ball filling and ball diameter on breakage kinetics of barite mineral
(Korza Matbaacilik, 2011)Barite is an industrial material that is used in many applications such as a filler in paint, paper and plastic, etc. In these industries, ultrafine grinding of barite mineral is generally needed. The absolute fineness of ... -
The effects of ball filling and ball diameter on kinetic breakage parameters of barite powder
(Elsevier, 2012)The absolute fineness of the ball diameter and the ball charge grading are important factors for the optimal operation of a ball mill. Therefore, the effects on breakage kinetics of the ball diameter and the fractional ... -
The effects of ball types on breakage parameters of barite
(Polish Mineral Engineering Society, 2014)Spherical balls are the dominant media shape used in the tumbling mills. However spherical balls wear into nonspherical fragments as a result of breakage due to impact and different wearing mechanisms inside the mill. Thus ... -
Effects of dopant rate and calcination parameters on photoluminescence emission of Y2O3:Eu3+ phosphors: A statistical approach
(Elsevier Sci Ltd, 2019)In this study, Y2O3:Eu3+ phosphorescent powders with different dopant rates were synthesized by sol-gel method. Statistical experimental design methods were used to investigate the effects of calcination temperature (800, ... -
Effects of flexural stiffness, axial velocity and internal support locations on translating beam's natural frequencies
(Trans Tech Publications, 2014)The aim of this paper is to examine the natural frequencies of beams for different flexural stiffness, internal simple support locations and axial moving speed. In the present investigation, the linear transverse vibrations ... -
Effects of holding force on the springback behavior of annealed aluminum plates
(Elsevier Ltd, 2016)Typical V-bending process was performed to investigate the effects of holding force on springback behavior of 1050-H14 aluminum alloy plates annealed at 120 °C for 20 minutes. Tests were conducted on a universal testing ...