Başlık için Mühendislik Fakültesi listeleme

2-Isopropenyl-2-oxazoline: A versatile monomer for functionalization of polymers obtained via RAFT

Weber, Christine; Neuwirth, Toni; Kempe, Kristian; Özkahraman, Bengi; Tamahkar Irmak, Emel; Mert Balaban, Hümeyra; Becer, C. Remzi; Schubert, Ulrich S. (2012)

2-Isopropenyl-2-oxazoline (iPOx) was polymerized for the first time via a controlled radical polymerization technique. Reversible addition-fragmentation chain transfer (RAFT) polymerization utilizing a dithiobenzoate-based ...

3D Food Printing With Improved Functional Properties: A Review

Çakmak, Hülya; Gümüş, Cansu Ekin (2020)

In food industry, 3D printing gives the opportunity to fabricate a 3D food structure using layer-by-layer deposition of the food material that may not be possible using conventional food production techniques. 3D food ...

Abrasive wear, structure, and mechanical aspects of Al–Al2O3 composites fabricated using various mixing media during P/M routes

Kurt, Halil İbrahim; Arık, Halil; Bağcı, Cengiz (Springer New York LLC, 2016)

The effects of mixing method during powder metallurgy (PM) routes on the abrasive wear behavior of Al–Al2O3p composite materials is investigated. For this purpose, starting Al powders with a constant volume fraction of 10% ...

AC chopper application and benefits of auxiliary windings for PSC motors

Işık, Mehmet Fatih; Güvenç, Uğur; Yanmaz, Hilmi (2013)

In this work, a novel driver circuit is designed for permanent split capacitor motors (PSC). With this driver circuit, semi-conductive technology is used in place of cumulative winding for this type of motors that are ...

Accurate detection of coronavirus cases using deep learning with attention mechanism and genetic algorithm

Kara, Ahmet (SPRINGER, 2024)

The novel coronavirus disease has caused severe threats to the daily life and health of people all over the world. Hence, early detection and timely treatment of this disease are signifcant to prevent the coronavirus’s ...

Acoustic analysis of a liquefied petroleum gas-fired pulse combustor

Kılıçarslan, Ali; Arısoy, Arif (2008)

Experimental investigation of acoustic characteristics of a Helmholtz type liquefied petroleum gas-fired pulse combustor is presented. In the experiments, the length of the tail pipe was changed from 1.9 m to 1.3 m by 10 ...

Adsorption of Brilliant Green from Aqueous Solutions onto Crosslinked Chitosan Graft Copolymers

Özkahraman, Bengi; Bal, Ayça; Acar, Işıl; Güçlü, Gamze (2011)

In this study, graft copolymerization of itaconic acid (IA) and crotonic acid (CA) onto the crosslinked chitosan beads were carried out using ammonium persulfate as initiator. Grafted chitosan beads were characterized by ...

Adsorption of Congo red from aqueous solution onto KOH-activated biochar produced via pyrolysis of pine cone and modeling of the process using artificial neural network

Kaya, Nihan; Yıldız Uzun, Zeynep; Altuncan, Ceren; Uzun, Harun (Springer Heidelberg, 2021)

Most of dyes cause various environmental and health problems due to their toxic, mutagenic, and even carcinogenic properties. Therefore, several treatment methods are used to remove dyes from wastewater. Adsorption is one ...

ADSORPTION OF DIAZO DYE DIRECT RED-28 AND TETRA-AZO DYE DIRECT BLACK-22 USING CALCINED KAOLIN IN AQUEOUS SOLUTIONS

Fındık, Serap (CHEM SOC ETHIOPIA, 2023)

ABSTRACT. In this study, the removal of diazo and tetra-azo dyes using calcined kaolin were compared. Direct red-28 (DR-28) and Direct black-22 (DB-22) was chosen as diazo and tetra-azo dyes, respectively. The kaolin ...

Adsorption of Methyl Violet 2B and Direct Red 28 From Single and Binary Solution Using a Magnetic Zeolite/TiO2/Fe3O4 Nanocomposite

Fındık, Serap (SPRINGER HEIDELBERG, 2023)

In this research, a magnetic adsorbent called ZTF was synthesized by combining zeolite and TiO2. Various analytical techniques including SEM, EDS, BET, FTIR, XRD, Zeta potential, and VSM were utilized to characterize the ...

Adsorptive separation of CH4, H2, CO2, and N2 using fullerene pillared graphene nanocomposites: Insights from molecular simulations

Mert Balaban, Hümeyra; Deniz, Celal Utku; Baykasoğlu, Cengiz (SPRINGER, 2023)

Context The adsorptive separation performances of fullerene pillared graphene nanocomposites (FPGNs) with tunable micro and meso porous morphology are investigated for the binary mixtures of CH4, H2, CO2 and N2 by using ...

Advancements and future directions in the antibacterial wound dressings - A review

Bal Öztürk, Ayça; Özkahraman, Bengi; Özbaş, Zehra; Yaşayan, Gökçen; Tamahkar, Emel; Alarçin, Emine (Wiley, 2021)

Wound repair is a complex process that has not been entirely understood. It can conclude in several irregularities. Hence, designing an appropriate wound dressing that can accelerate the healing period is critical. Infections, ...

Affinity binding of proteins to the modified bacterial cellulose nanofibers

Bakhshpour, Monireh; Tamahkar Irmak, Emel; Andaç, Müge; Denizli, Adil (Elsevier B.V., 2017)

The potential of the modified bacterial cellulose (BC) nanofibers was determined bearing metal ion coordination interactions to enhance the protein adsorption and binding capacity. Thus, a household synthesized metal ...

Aflatoxin M 1 and ochratoxin A in baby formulae in Turkey: Occurrence and safety evaluation

Kabak, Bülent (Elsevier, 2012)

During 2011, 62 samples of baby formulae were checked for aflatoxin M 1 (AFM 1) and ochratoxin A (OTA) by immunoaffinity column (IAC) clean-up and high performance liquid chromatography with fluorescence detection (HPLC-FD). ...

Aflatoxin M 1 in UHT milk consumed in Turkey and first assessment of its bioaccessibility using an in vitro digestion model

Kabak, Bülent; Özbey, Fatih (Elsevier, 2012)

Contamination of milk and dairy products with aflatoxin M 1 (AFM 1) continues to receive increased attention because of its potential health hazard to humans. The first aim of this study was to know the occurrence and ...