Bölüm "Hitit Üniversitesi, Mühendislik Fakültesi, Kimya Mühendisliği Bölümü" WoS İndeksli Yayınlar Koleksiyonu için listeleme
Toplam kayıt 109, listelenen: 21-40
-
Decolorization of Direct Black 22 by Photo Fenton like Method Using UV Light and Zeolite Modified Zinc Ferrite: Kinetics and Thermodynamics
(SLOVENSKO KEMIJSKO DRUSTVO, 2022)In this study, a heterogeneous catalyst was prepared to enhance photo-Fenton like oxidation of Direct Black-22 (DB-22). Zeolite modified with zinc ferrite was used as a catalyst. The prepared catalyst was characterized ... -
Decomposition of NaBH4 with self-regeneration of carbon-supported CoCl2 catalyst
(Taylor and Francis Inc., 2017)In this study, economically favorable CoCl2 catalysts at four different amounts were supported on activated carbon (AC) for NaBH4 dehydrogenation. Supported catalyst could achieve hydrogen release for 2,060 cycles, which ... -
Determination of Mechanical Properties of Composite Supports Used in Catalytic Membranes for Hydrogen Production and Separation
(Wiley-V C H Verlag Gmbh, 2020)This study includes the determination of mechanical properties involving equibiaxial flexural strength, elastic modulus, strain and hardness for composite supports developed to be used in catalytic membranes in order to ... -
The effect of aluminum and ammonium perchlorate content on temperature sensitivity, mechanical properties and performance of HTPB propellants
(The Japan Society for Aeronautical and Space Sciences, 2007)This paper describes the effect of aluminum content variation of HTPB (hydroxyl terminated polybutadiene) propellants on temperature sensitivity, mechanical properties and performance values. Aluminum (Al) content was ... -
Effect of boiling point and density prediction methods on stochastic reconstruction
(American Chemical Society, 2018)Stochastic reconstruction (SR) methods are used to generate a series of molecules that mimic the properties of complex mixtures using partial analytical data. Determining a quantitative composition using these methods is ... -
The Effect of Colemanite on Thermal Properties of Recycled Polyethylene
(Polish Acad Sciences Inst Physics, 2019)Boron is known as a rare and one of the most important elements for future engineering. Boron is naturally present in nature in the form of minerals, such as tincal, ulexite, colemanite, boracite, datolite and so on. Besides ... -
Effect of external salt addition on the structural, morphological and electrochemical properties of flexible PEDOT:PSS based LbL multilayered films
(Elsevier, 2019)This article concerns with the effect of external salt addition on the structural, morphological and electrochemical properties of linear poly(ethylene imine) (LPEI) and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) ... -
The effect of finely-divided fillers on the adhesion strengths of epoxy-based adhesives
(Elsevier Ltd, 2015)It was aimed to investigate the effect of five different fillers on the adhesion strength of the metal parts used in different industries by using T-peel and lap-shear tests with respect to ASTM D 1876 and ASTM D 1002 ... -
The effect of potassium modification on structural properties and catalytic activity of copper and iron containing SBA-16 catalysts for selective oxidation of ethanol
(Elsevier Ltd, 2019)Copper and iron SBA-16 catalysts were synthesized using hydrothermal method and modified with potassium. XRD patterns showed that characteristic peaks of SBA-16 for all catalysts did not destroy with metal loading. The ... -
The effect of starting material types on the structure of graphene oxide and graphene
(2019)In this study, the effects of starting material types on graphene oxide (GO) are reported with the aim of developing graphene (GR) synthesis. The GOs were prepared from natural graphite (NG) powder and graphite nanoplate ... -
The effect of surface area and dopant percentage on hydrogen storage of Pt@ac loaded activated carbon and Cu-BTC composites
(International Journal of Renewable Energy Research, 2016)Hydrogen storage as part of a hydrogen energy system needs to be investigated deeply for a common usage of the system. Many alternative hydrogen storage media have been investigated in the last decade to solve efficient ... -
Effect of surfactant types on the size of tin oxide nanoparticles
(Polish Academy of Sciences, 2017)In this study, tin oxide (SnO2) nanoparticles were synthesized by hydrothermal method in the presence of hydrazine and ammonia by adding surfactant for 12 h in a Teflon autoclave at 100°C reaction temperature. Tin(II) ... -
Effect of the activator type and catalyst/activator ratio on physical and mechanical properties of cast PA-6
(2008)The aim of the study is to produce suitable unfilled cast polyamide-6 composition exhibiting optimum mechanical, physical, thermal and electrical properties with anionic polymerization mechanism. Sodium lactamate was used ... -
The effect of TiO2 contained within a titanium silicalite (TS-1) catalyst and on the selective oxidation of ammonia
(Berkeley Electronic Press, 2013)The selective oxidation of ammonia to hydroxylamine using titaniumsilicalite-1 as a catalyst with an increasing content range of 1-2.5 wt% TiO2 was systematically investigated in a batch reactor. The hydroxylamine yielded ... -
Efficient removal of acidic dye using low-cost biocomposite beads
(2013)The objective of this study is to prepare and characterize chitosan/zeolite biocomposite beads and utilize them as adsorbent for removal of anionic dye, Acid Black 194 (AB194). Characterization studies of biocomposite beads ... -
Electrical conductivity and corrosion performances of in situ and ex situ AA7075 aluminum composites
(Polish Academy of Sciences, 2017)The present study investigates corrosion behaviors and electric conductivity of AA7075 in situ (TiAl3) and ex situ (B4C) composites produced by powder metallurgy method. In production of in situ composites, various amounts ... -
Electrochemical copper (II) sensor based on chitosan covered gold nanoparticles
(Kluwer Academic Publishers, 2014)This study outlines a new sensing platform based on glassy carbon electrodes modified by gold nanoparticles (AuNPs) for the determination of heavy metal. A glassy carbon electrode was modified by chitosan stabilized AuNPs. ... -
Elmas nano parçacık takviyeli krom kaplanmış gözenekli toz metal parçaların korozyon davranışlarının araştırılması
(Gazi Üniversitesi, 2016)Bu çalışmada, su atomizasyon yöntemi ile üretilmiş, %0,2 ve %0,5 karbon takviyeli Distaloy tozları 420 MPa sıkıştırma basıncında tek eksenli pres ile sıkıştırılmış, 1120ºC’de 30 dakika sinterlenmiştir. Elde edilen numunelere ... -
Encapsulation of CuO nanoparticles inside the channels of the multi-walled carbon nanotubes functionalized with thermal stress
(Elsevier Science Sa, 2021)Commercially available multi-walled carbon nanotubes (MWCNTs), which are generally naturally intertwined, were cut by sudden, repeated exposure to oxidizing conditions in the air. This process has been proved to be an ... -
Enhancement of dispersion stability of inorganic additives via poly(sodium-4- styrenesulfonate) treatment geared to hydrogel applications
(TUBITAK, 2021)This study reports the preparation of poly(sodium-4-styrene sulfonate) (PSS) treated bentonite and clinoptilolite to prevent the agglomeration and sedimentation of these inorganic fillers during the preparation of hydrogel. ...