Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 564, listelenen: 169-188
-
Effects of holding force on the springback behavior of annealed aluminum plates
(Elsevier Ltd, 2016)Typical V-bending process was performed to investigate the effects of holding force on springback behavior of 1050-H14 aluminum alloy plates annealed at 120 °C for 20 minutes. Tests were conducted on a universal testing ... -
The Effects of iso-propanol and n-heptane Fuel Blends on HCCI combustion characteristics and engine performance
(2015)In this study, the effects of iso-propanol fuel blends were investigated on HCCI combustion and engine performance. The variations of cylinder pressure, heat release rate, start of combustion and engine performance were ... -
Effects of lithium doping on hydrogen storage properties of heat welded random CNT network structures
(Elsevier Ltd, 2016)This paper presents the effects of lithium doping on the hydrogen storage capability of heat welded random carbon nanotube (CNT) network structures having different cross-link densities at room temperature. Cluster based ... -
Effects of mill speed on kinetic breakage parameters of four different particulate pumices
(Taylor and Francis, 2013)In this study, the effect of mill speed was investigated on different particulate pumice samples at batch grinding conditions based on a kinetic model. For this purpose, S i and B i,j equations were determined from the ... -
The Effects of Moisture Content and Coal Mixtures on the Grinding Behavior of Two Different Coals
(Taylor & Francis Inc, 2014)In this article, effects of moisture content and coal mixtures on grinding properties of the samples of two different fine coals, which were used in the Golta Cement Factory in Isparta (Turkey) were investigated. Grinding ... -
The Effects of Moisture Content and Coal Mixtures on the Grinding Behavior of Two Different Coals (vol 36, pg 292)
(Taylor & Francis Inc, 2014)[Abstract Not Available] -
Effects of Moisture Contents and Storage Temperatures on the Physical, Chemical and Microbiological Qualities of Non-Sulfitted Dried Apricots
(ANKARA UNIV, FAC AGR, 2022)This study was conducted to determine the changes in the physicochemical and microbiological qualities of the non-sulfited sun dried apricots (NSDAs) at three different moisture contents (MCs, 13.7, 23.5 and 27.0%) and at ... -
Effects of nitridation time and precursor particle size on yield of β-SiAlON synthesized from calcined kaolinite
(Springer New York LLC, 2019)Carbothermal reduction and simultaneous nitriding (CTRN) of natural aluminosilicates is a method used to obtain phases of Si–Al–O–N system. SiAlON phases have important applications, such as high technology ceramics, for ... -
The effects of powder filling on the kinetic breakage parameters of natural amorphous silica
(Taylor and Francis Inc., 2017)In this study, the effects of powder filling were investigated on natural amorphous silica at batch grinding conditions based on a kinetic model. For this purpose, first eight different mono-sized fractions were carried ... -
Effects of pretreatment and various operating parameters on permeate flux and quality during ultrafiltration of apple juice
(2012)The central composite design with a quadratic model was used to investigate the effect of temperature (20-40°C) and transmembrane pressure (TMP) (100-300kPa) as well as pretreatment with gelatin and bentonite (0:0-300:1500mgL ... -
Effects of probiotic bacteria on the bioaccessibility of aflatoxin B1 and ochratoxin A using an in vitro digestion model under fed conditions
(Taylor and Francis, 2009)In the present study, we aimed at determining the release of aflatoxin B1 (AFB1) and ochratoxin A (OTA) from different food products in the gastro-intestinal tract in the absence and presence of probiotics, a possible ... -
Effects of the alumina reinforcement ratio on the corrosion properties of iron based composite materials
(Carl Hanser Verlag, 2020)Iron based composite materials reinforced with various ceramic particles are used in operating conditions requiring features such as high hardness, strength and wear resistance. The composite materials may be subject to ... -
The effects of the median filter with different window sizes for ultrasound image
(Institute of Electrical and Electronics Engineers Inc., 2017)Ultrasound is widely used in medical imaging. Unfortunately, speckle noise decreases the quality of the ultrasound image. One of the filters to reduce speckle noise in ultrasound image is the median filter. The median ... -
Effects of two important parameters on capacity of a laboratory Jaw crusher of different coals: Choke feed level and effective reduction ration
(Taylor and Francis, 2011)In this study, the effects of three different choke feed level (1/1, 1/2, and 1/4) and four different effective reduction ratios (2.5, 5, 10, and 20) depend on the capacity of the crusher of the three different characteristic ... -
Effects of Water Soluble Materials on Water-in-oil Primary Food Emulsion Stability
(2019)Water-in-oil (w/o) primary food emulsions are often used for encapsulation of bioactive food ingredients or preparing multiple emulsions, however there is a lack of study about evaluation of stability of these emulsions ... -
The efficacy of nanoemulsion-based delivery to improve vitamin D absorption: comparison of in vitro and in vivo studies
(Wiley-VCH Verlag, 2018)SCOPE: Vitamin D (VD) is a fat-soluble vitamin that has a wide range of skeletal and non-skeletal functions. Although it can be synthesized through sun exposure and obtained from fortified foods, VD inadequacy is epidemic ... -
Efficient and broadband guided wave one-way mode-order conversion with theoretical and numerical analysis
(Optical Society of American (OSA), 2013)In this article, an efficient method of asymmetric conversion of guided modes is investigated. From a basic excitation consisting of (mainly) the lowest-order mode of the input multimode strip waveguide, we achieve a ... -
Efficient removal of acidic dye using low-cost biocomposite beads
(2013)The objective of this study is to prepare and characterize chitosan/zeolite biocomposite beads and utilize them as adsorbent for removal of anionic dye, Acid Black 194 (AB194). Characterization studies of biocomposite beads ... -
An elastic-plastic and residual stress analysis steel reinforced thermoplastic composite cantilever beam
(2010)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ... -
An elastic-plastic stress analysis of woven Ni-Cr reinforced thermoplastic composite cantilever beam
(2007)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by Ni-Cr steel fibers. The beam is loaded by a constant ...
