Güncel Gönderiler: Scopus İndeksli Yayınlar Koleksiyonu
Toplam kayıt 2692, listelenen: 1861-1880
-
Conversion of KCl into KBH4 by mechano-chemical reaction and its catalytic decomposition
(Springer New York LLC, 2017)Production of KBH4, in the presence of KCl, B2O3 and MgH2 by means of a mechanical reaction and a dehydrogenation kinetic, constitute the main parts of this study. Operating time and reactant ratio are considered as two ... -
A comprehensive mathematical model for dynamic cellular manufacturing system design and Linear Programming embedded hybrid solution techniques
(Elsevier Ltd, 2016)Considering the ever changing market conditions, it is essential to design responsive and flexible manufacturing systems. This study addresses the multi-period Dynamic Cellular Manufacturing System (DCMS) design problem ... -
Temperature-Dependent Electrical Characteristics of Au/Si3N4/4H n-SiC MIS Diode
(Springer New York LLC, 2018)Electrical characteristics of the Au/Si3N4/4H n-SiC metal–insulator-semiconductor (MIS) diode were investigated under the temperature, T, interval of 160–400 K using current–voltage (I–V), capacitance–voltage (C- V) and ... -
Second law analysis and heat transfer in a cross-flow heat exchanger with a new winglet-type vortex generator
(Elsevier Ltd, 2010)In this paper a second law analysis of a cross-flow heat exchanger (HX) is studied in the presence of a balance between the entropy generation due to heat transfer and fluid friction. The entropy generation in a cross-flow ... -
Exergy transfer in a porous rectangular channel
(Elsevier Ltd, 2009)Present paper is performed to investigate the heat and exergy transfer characteristics of forced convection flow through a horizontal rectangular channel where open-cell metal foams of different pore densities such as 10, ... -
Sandwiched graphene-fullerene composite: A novel 3-D nanostructured material for hydrogen storage
(Elsevier Ltd, 2016)The main objective of this paper is to investigate hydrogen storage capacity of a novel carbon based nanoporous material composition that is built up by covalently sandwiched fullerene units between parallel graphene sheets. ... -
Combined experimental and theoretical investigation of characterization and hydrogen storage properties of Zn(II) based complex and composites
(Elsevier Ltd, 2015)Metal organic structured coordination complex was synthesized by using Zn(II), 1,10 Phenantroline and teraphtalic acid building blocks. Then the synthesized compound have been characterized with Ft-IR, TGA/DTA/DrTGA, EA, ... -
Effects of lithium doping on hydrogen storage properties of heat welded random CNT network structures
(Elsevier Ltd, 2016)This paper presents the effects of lithium doping on the hydrogen storage capability of heat welded random carbon nanotube (CNT) network structures having different cross-link densities at room temperature. Cluster based ... -
Nickel-based bimetallic nanocatalysts in high-extent dehydrogenation of hydrazine borane
(2012)Hydrazine borane N 2H 4BH 3 (HB) is a promising chemical hydrogen storage material but its development is highly dependent on the catalyst that will be used to dehydrogenate it, that is, to hydrolyze the BH 3 group and ... -
Hydrogen storage in heat welded random CNT network structures
(Elsevier Ltd, 2015)The objective of this study is to investigate hydrogen storage capability of heat welded random carbon nanotube (CNT) network structures. To achieve this objective, different three-dimensional random CNT network structures ... -
Experimental and simulation study on structural characterization and hydrogen storage of metal organic structured compounds
(Elsevier Ltd, 2016)One of the barrier for common usage of hydrogen energy system is storing hydrogen efficiently. Especially for mobile applications, it is very important to store hydrogen in small spaces reversibly. Metal-organic framework ... -
Assessment of an IGCC based trigeneration system for power, hydrogen and synthesis fuel production
(Elsevier Ltd, 2016)In this study, an integrated gasification combined cycle based trigeneration system is proposed to produce power, hydrogen and various Fischer-Tropsch (FT) synthesis products. The proposed plant consists of an (a) air ... -
Modeling of a convective-infrared kiwifruit drying process
(Elsevier Ltd, 2017)This paper aims to evaluate the experimental performance of a convective-infrared system with heat recovery (CIRHR) at different drying temperatures (40, 45, 50 and 55 °C) and 0.5 m/s air velocity and also to discuss and ... -
Novel 2D micro-porous metal-organic framework for hydrogen storage
(Elsevier Ltd, 2016)A novel two dimensional Metal-Organic Framework (MOF) structured compound with trimesic acid (TMA), 1,10 Phenantroline (Phen) and Cu(II) building blocks were synthesized and characterized experimentally. Then Grand Canonical ... -
Energy and exergy analyses of hydrogen production by coal gasification
(Elsevier Ltd, 2017)In this study, we examine an integrated coal based gasification system developed for hydrogen production and power generation. The proposed plant consists of air separation unit, gasification unit, gas cooling and cleaning ... -
Factors affecting the removal of aflatoxin M1 from food model by Lactobacillus and Bifidobacterium strains
(Taylor and Francis, 2008)This paper describes the ability of six dairy strains of Lactobacillus and Bifidobacterium to remove aflatoxin M1 (AFM1) from phosphate-buffered saline (PBS) and reconstituted milk. Bacteria were incubated in both PBS and ... -
Synthesis of Zn(II) ion-imprinted polymeric adsorbent for selective removal of zinc from aqueous solutions
(2011)In this study, Zn(II)-imprinted polymer microbeads were synthesized for selective removal of Zn(II) from aqueous solutions. The microbeads were prepared using methacrylic acid and 1,4-vinyl pyrrolidone as functional monomers, ... -
Preparation and Characterization of PVA/PVP Nanofibers as Promising Materials for Wound Dressing
(2013)The PVA/PVP, PVA/PVP with 5% and 10% chitosan and PVA/PVP-Iodine fibers were produced via electrospinning technique. Their morphological and chemical characteristics were examined with SEM, TGA, FT-IR, viscometer and ... -
Effect of the activator type and catalyst/activator ratio on physical and mechanical properties of cast PA-6
(2008)The aim of the study is to produce suitable unfilled cast polyamide-6 composition exhibiting optimum mechanical, physical, thermal and electrical properties with anionic polymerization mechanism. Sodium lactamate was used ... -
Solving capacitated location routing problem by variable neighborhood descent and GA–Artificial neural network hybrid method
(Faculty of Transport and Traffic Engineering, 2018)This paper aims to find the optimal depot locations and vehicle routings for spare parts of an automotive company considering future demands. The capacitated location-routing problem (CLRP), which has been practiced by ...