Bölüm "Hitit Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü" WoS İndeksli Yayınlar Koleksiyonu için listeleme
Toplam kayıt 102, listelenen: 41-60
-
Exhaust gas analysis of an eight cylinder gasoline engine based on engine speed
(Elsevier Ltd, 2017)In this experimental work, exhaust gas analysis of an eight cylinder and v-type gasoline engine, namely, a Chevrolet 5.7, is experimentally performed in terms of engine speed at laboratory conditions by using of an exhaust ... -
Experimental and numerical analysis of low velocity impact on a preloaded composite plate
(Elsevier Ltd, 2015)An experimental and numerical study on the influence of biaxial preloading on the low velocity impact performance of E-glass/epoxy-laminated composite plates was conducted. For this aim, an experimental device was developed ... -
Experimental and numerical investigation of geometry effects on multiple impinging air jets
(Elsevier Ltd, 2014)The effect of jet geometry on the flow and the heat transfer characteristics was investigated experimentally and numerically for elliptic and rectangular impinging jet arrays. Detailed heat transfer measurements over a ... -
Experimental and numerical study of alumina reinforced aluminum matrix composites: Processing, microstructural aspects and properties
(Elsevier Ltd, 2016)Co-continuous alumina-aluminum composite materials with excellent physical and mechanical properties offer great potentials for lightweight, wear resistant, and high-temperature applications. They combine metallic properties ... -
Experimental investigation of a cross-flow heat exchanger with wing-type vortex generators
(2008)In this study, heat and fluid flow in a plate-fin heat exchanger with wing-type convergent-divergent longitudinal vortex generators (CDLVGs) were studied experimentally. A cross-flow plate-type heat exchanger was designed ... -
An experimental investigation of heat transfer enhancement in a rectangular duct with plate fins
(2009)In this study, using an ideal heat exchanger model, a detailed evaluation of performance parameters in the turbulent regime for the enhancement of heat transfer by using winglet-type vortex generators is carried out. The ... -
Experimental investigation of heat transfer from different pin fin in a rectangular channel
(Taylor and Francis Ltd., 2018)In this study, the effect of both hexagonal pin fins (HPFs) and cylindrical pin fins (CPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally investigated. ... -
Experimental investigation of heat transfer in a channel with new winglet-type vortex generators
(Elsevier Ltd, 2014)Both new punched triangular vortex generators (PTVGs) and punched rectangular vortex generators (PRVGs) have been developed. Both the triangular and rectangular vortex generators were directly punched from the longitudinal ... -
Experimental investigation of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs
(2012)Detailed heat transfer measurements over a surface with V-shaped ribs (V-SR) and convergent-divergent shaped ribs (CD-SR) by a circular impinging jet array was investigated using thermal infrared camera. Both V-SR and CD-SR ... -
Experimental investigation of the axial crushing behavior of aluminum/CFRP hybrid tubes with circular-hole triggering mechanism
(ELSEVIER SCI LTD, 2023)The current study investigates the axial crushing behavior of filament-wound aluminum/carbon fiber reinforced plastic (Al/CFRP) hybrid tubes with circular-hole triggering mechanism. The proposed hybrid design consists of ... -
An experimental study on the compressive response of CFRP honeycombs with various cell configurations
(Elsevier Ltd, 2019)The experimental investigation on the compressive response of carbon fiber reinforced polymer (CFRP) honeycombs with various cell configurations was carried out in the present work. The CFRP honeycomb specimens were ... -
Experimental study on the heat transfer and pressure drop of a cross-flow heat exchanger with different pin-fin arrays
(2011)In this study, convective heat transfer and pressure drop in a cross-flow heat exchanger with hexagonal, square and circular (HSC) pin-fin arrays were studied experimentally. The pin-fins were arranged in an in-line manner. ... -
Fatigue behavior of adhesively bonded glass fiber reinforced plastic composites with different overlap lengths
(SAGE Publications Ltd, 2015)The joining techniques of lightweight and strong materials in the transport industry (e.g. automotive, aerospace, shipbuilding industries) are very important for the safety of the entire structure. In these industries, ... -
Flow and heat transfer characteristics of transverse perforated ribs under impingement jets
(2013)An experimental study was conducted to investigate heat transfer and flow characteristics under impingement of a multiple circular jet array with perforated rib surfaces (PRS) and solid rib surfaces (SRS). Heat transfer ... -
Forchheimer forced convection in a rectangular channel partially filled with aluminum foam
(Elsevier Inc., 2016)In this paper, heat transfer and pressure drop were investigated by placing open-cell aluminum foam in different ratios according to the channel volume in a hydrodynamically fully developed rectangular channel. Aluminum ... -
A fully coupled thermal–microstructural–mechanical finite element processmodel for directed energy deposition additive manufacturing of Ti–6Al–4V
(TAYLOR & FRANCIS LTD, 2023)A fully coupled thermal–microstructural–mechanical finite element modelling framework is developed to investigate the distortion and residual stresses during directed energy deposition (DED) of multi-phase Ti–6Al–4V alloy. ... -
Heat transfer augmentation by swirl generators inserted into a tube with constant heat flux
(2009)A novel conical injector type swirl generator (CITSG) is devised in this study. Performances of heat transfer and pressure drop in a pipe with the CITSG are experimentally examined for the CITSGs' angle (α) of 30°, 45° and ... -
Heat transfer characteristics of longitudinal perforated and unperforated ribs under impingement jets
(American Society of Mechanical Engineers (ASME), 2014)Impingement heat transfer is considered as heat transfer enhancement technique. Impinging jets are used in many applications where high heat transfer rates are required. An experimental study was conducted to investigate ... -
High temperature wear behavior of the surface-modified externally cooled rolls
(Elsevier B.V., 2018)Externally cooled rolls of a steel plant were coated using three different surface modification techniques, namely titanizing, boronizing and borotitanizing. The grown coatings were examined using optical microscopy, ... -
Hydrogen storage in heat welded random CNT network structures
(Elsevier Ltd, 2015)The objective of this study is to investigate hydrogen storage capability of heat welded random carbon nanotube (CNT) network structures. To achieve this objective, different three-dimensional random CNT network structures ...