Makine ve Metal Teknolojileri Bölümü

Material Production and the Effect of the System on Biocompatibility in the Modified Metal Injection Method

Çiçek, Bünyamin; Sun, Yavuz (POLSKA AKAD NAUK, POLISH ACAD SCIENCES, INST METALL & MATER SCI PAS, 2023)

In this study, the bio state of the alloy produced in the modified metal injection system was monitored after sintering. A new system operating with high gas pressure, far from the traditional injection model, has been ...
Deep drawing of polymer coated metal sheets

Erdin, Muhammed Emin; Özdilli, Özgür (Korean Society of Mechanical Engineers, 2019)

In the present study, the deep drawing of polymer coated metallic sheets were experimentally investigated to reduce friction and increase manufacturing efficiency without using a lubricant. Coating of metal sheets with a ...
Effects of holding force on the springback behavior of annealed aluminum plates

Erdin, Muhammed Emin; Atmaca, Alper (Elsevier Ltd, 2016)

Typical V-bending process was performed to investigate the effects of holding force on springback behavior of 1050-H14 aluminum alloy plates annealed at 120 °C for 20 minutes. Tests were conducted on a universal testing ...