Browsing Polimer Mühendisliği Bölümü by Issue Date
Now showing items 1-20 of 83
-
Modeling of grinding process by artificial neural network for calcite mineral
(IEEE, 2011)The grindability properties of calcite sample belong to Afyonkarahisar region were investigated at batch grinding conditions based on a kinetic model. The obtained kinetic model parameters were used to estimate the product ... -
The effects of ball filling and ball diameter on breakage kinetics of barite mineral
(Korza Matbaacilik, 2011)Barite is an industrial material that is used in many applications such as a filler in paint, paper and plastic, etc. In these industries, ultrafine grinding of barite mineral is generally needed. The absolute fineness of ... -
Adsorption of Brilliant Green from Aqueous Solutions onto Crosslinked Chitosan Graft Copolymers
(2011)In this study, graft copolymerization of itaconic acid (IA) and crotonic acid (CA) onto the crosslinked chitosan beads were carried out using ammonium persulfate as initiator. Grafted chitosan beads were characterized by ... -
Removal of Cu 2+ and Pb 2+ Ions Using CMC Based Thermoresponsive Nanocomposite Hydrogel
(2011)In this study, carboxymethylcellulose (CMC) based thermoresponsive nanocomposite hydrogel was synthesized for the removal of Cu 2+ and Pb 2+ ions from aqueous solutions. To prepare nanocomposite hydrogel, graft copolymerization ... -
Effects of two important parameters on capacity of a laboratory Jaw crusher of different coals: Choke feed level and effective reduction ration
(Taylor and Francis, 2011)In this study, the effects of three different choke feed level (1/1, 1/2, and 1/4) and four different effective reduction ratios (2.5, 5, 10, and 20) depend on the capacity of the crusher of the three different characteristic ... -
Comparison with some porous materials and the effects of powder filling on breakage parameters of diatomite in dry ball milling
(Taylor and Francis, 2011)In this study, a comparison of breakage parameters with some porous materials (pumice, trass, and amorphous silica) and the effects on breakage kinetics of powder filling of diatomite were investigated on at batch grinding ... -
Investigation of the breakage parameters of gypsum as dependent on interstitial filling in a laboratory ball mill
(Springer Nature, 2011)Gypsum is an industrial material used in many applications such as building and chemical industry, fertilizer manufacture, medicine and dentistry. In these industries, there is need for finely ground gypsum. Energy consumption ... -
Investigation of breakage behavior of different mineralogical and morphological characteristic pumices
(2011)The objective of this study is to analyze dry grinding behavior of four different pumices in terms of Bond grindability value, selection and breakage parameters values. For this purpose, firstly, Bond grindability test ... -
Computer simulation of product size distribution of a laboratory ball mill
(Taylor and Francis Inc., 2011)In this study, a computer simulation of a suitable matrix notation of the Broadbent and Callcott grinding model was written. First, a chromite sample was ground in the laboratory type batch ball mill at different grinding ... -
Influence of interstitial filling on breakage kinetics of gypsum in ball mill
(Elsevier, 2011)Gypsum is an industrial material used in many applications such as building and chemical industry, fertilizer manufacture, medicine and dentistry. In these industries, there is need for finely ground gypsum. Energy consumption ... -
A new size distribution model by t-family curves for comminution of limestones in an impact crusher
(Elsevier, 2011)In the evaluation of crushers, t-family curves obtained from single particle test methods are frequently used. It is known that there are many difficulties and problems in these tests. In this study the breakage behaviour ... -
Synthesis of Zn(II) ion-imprinted polymeric adsorbent for selective removal of zinc from aqueous solutions
(2011)In this study, Zn(II)-imprinted polymer microbeads were synthesized for selective removal of Zn(II) from aqueous solutions. The microbeads were prepared using methacrylic acid and 1,4-vinyl pyrrolidone as functional monomers, ... -
A study on the effect of ball diameter on breakage properties of clinker and limestone
(The Council of Scientific & Industrial Research, 2012)Effect of ball diameter has been studied on the limestone and clinker samples under batch grinding conditions based on a kinetic model. Firstly, eight different mono-size fractions between 1.7 mm and 0.106 mm formed by a ... -
2-Isopropenyl-2-oxazoline: A versatile monomer for functionalization of polymers obtained via RAFT
(2012)2-Isopropenyl-2-oxazoline (iPOx) was polymerized for the first time via a controlled radical polymerization technique. Reversible addition-fragmentation chain transfer (RAFT) polymerization utilizing a dithiobenzoate-based ... -
Estimation of the Bond grindability index from chemical analysis values and modulus of mixture of raw material of marls
(ICE Publishing Ltd., 2012)In this study, the relationships between Bond grindability index (G bg) and chemical constituents were investigated on marl samples from the AS cement factory (Burdur/Turkey). First, standard Bond grindability tests were ... -
Estimation of the bond grindability index from the sink-float test data of two different particulate pumices
(Taylor and Francis, 2012)In this study, equations for estimating the Bond grindability index by the sink-float test data of pumice were developed. Primarily, the cumulative weight and porosity content of the floating fraction were determined for ... -
The effects of ball filling and ball diameter on kinetic breakage parameters of barite powder
(Elsevier, 2012)The absolute fineness of the ball diameter and the ball charge grading are important factors for the optimal operation of a ball mill. Therefore, the effects on breakage kinetics of the ball diameter and the fractional ... -
Production of water-resistant briquettes from a mixture of an imported bituminous coal and a Turkish lignite with copolymer binder
(Taylor and Francis, 2013)In this study, low-quality Denizli-Kale lignite was mixed with a high-quality imported (Siberian) bituminous coal, and optimum briquetting conditions were investigated with a copolymer (Mowilith-VDM©) binder. In the ... -
Synthesis and characterization of novel tetra terminal alkynyl-substituted phthalocyanines and their star polymers via click reaction
(2013)For the first time, symmetrically tetra terminal alkynyl-substituted phthalocyanines (Pcs) were functionalized with polymers, that is, via 1,3-dipolar cycloaddition reaction. For this purpose, 4-pent-4-ynyloxy- phthalonitrile ... -
Comparisons of dry grinding kinetics of lignite, bituminous coal, and petroleum coke
(Taylor and Francis, 2013)The objective of this study was to analyze dry grinding kinetics of three different solid fuels in terms of selection and breakage distribution functions values using a batch laboratory ball mill. For this purpose, first, ...
