Başlık için Polimer Mühendisliği Bölümü listeleme
Toplam kayıt 83, listelenen: 28-47
-
The environmental effects of the air shock generated by blasting
(Mugla Sitki Kocman University, 2017)Patlatmanın sebep olduğu hava şoku, patlayıcı yük miktarı, patlama ve sismograf arasındaki yatay mesafe ve hava koşulları gibi çeşitli parametrelere bağlı olarak, taş ocağında veya ocağın çevresinde önemli ölçüde farklılıklar ... -
Estimation of the Bond grindability index from chemical analysis values and modulus of mixture of raw material of marls
(ICE Publishing Ltd., 2012)In this study, the relationships between Bond grindability index (G bg) and chemical constituents were investigated on marl samples from the AS cement factory (Burdur/Turkey). First, standard Bond grindability tests were ... -
Estimation of the bond grindability index from the sink-float test data of two different particulate pumices
(Taylor and Francis, 2012)In this study, equations for estimating the Bond grindability index by the sink-float test data of pumice were developed. Primarily, the cumulative weight and porosity content of the floating fraction were determined for ... -
Evaluation by multi gravity separator (MGS) of a low grade chromite tailing from Yesilova-Burdur (Turkey)
(Polish Mineral Engineering Society, 2019)In this study, concentrability by a Multi-Gravity-Separator (MGS) of the chromite tailings with content 23.84% Cr2O3 from Yeşilova-Burdur (Turkey) is investigated. Mineralogical analyses showed that the chromite tailings ... -
An evaluation of a modified product size distribution model based on t-family curves for three different crushers
(Oficyna Wydawnicza Politechniki Wroclawskiej, 2013)Crushing is a process which is widely used in mineral processing plants, cement factories, aggregates plants and some other industrial plants. Specific fracture energy of the particles is not the only fundamental property ... -
Evaluation of Grindability Behaviors of Four Different Solid Fuels Blending by Using the Hardgrove Mill
(Polish Mineral Eng Soc, 2019)Grindability measurements are widely used in mineral and coal processing industry to determine resistance of materials to comminution. Grindability measurement as testing methods can be divided into two general categories; ... -
The evaluation of grinding process using artificial neural network
(Elsevier, 2016)Ball milling has been the subject of intensive research for the past few decades. It is indeed the most encountered mineral processing operation of size reduction. Known as the most energy inefficient process, focus has ... -
Evaluation of hyaluronic acid nanoparticle embedded chitosan-gelatin hydrogels for antibiotic release
(Wiley, 2021)The development of chitosan-gelatin (CS-G) hydrogels embedded with ampicillin-loaded hyaluronic acid nanoparticles (HA-NPs) for wound dressing is proposed. It was aimed to provide controlled ampicillin delivery by incorporation ... -
The Evaluation Potential as Micronized Calcite of White Marble Waste
(Polish Mineral Eng Soc, 2020)Natural calcium carbonates have a great importance in the world's economy due to their numerous applications areas such as calcium carbonate in the paper and paint industries. The final calcite products have rigorous quality ... -
Flocculation of fine particles in ceramic wastewater by using polymers
(Polish Mineral Engineering Society, 2014)The clarification of industrial wastewaters by solid-liquid separation techniques and the removal of suspended particles are the problems of growing environmental consciousness. However, there appears to be very limited ... -
Functionalized 2-(hydroxyethyl) methacrylate (HEMA)-co-acrylamide (AAm) hydrogels: Kinetic and Isotherm Modelling Analysis on the Removal of Cu(II) Ions
(Prints Publications Pvt Ltd, 2019)A functionalized hydrogel composed of 2-(hydroxyethyl) methacrylate (HEMA) and acrylamide (AAm) was synthesized by amination and saponification reactions, respectively, and its functionality was examined for the elimination ... -
Grand canonical Monte Carlo simulations of methane adsorption in fullerene pillared graphene nanocomposites
(Elsevier Science Inc, 2021)The objective of this study is to investigate the methane adsorption performance of fullerene pillared graphene nanocomposites (FPGNs) with adjustable micro and meso porous morphology and high surface/weight ratios. Different ... -
Hydrophobic surface modification and characterization of melamine foam
(TUBİTAK, 2023)Abstract: Superhydrophobic and oleophilic modification of commercial acoustic melamine foam (MF) was made in this study. The modification was carried out with chitosan (CHI) and silica particles (SiO2 ), by using both a ... -
Hydrophobicity of galena with ovalbumin and dithiophosphinate in relation to its potential response
(Polish Mineral Engineering Society, 2018)This study was performed to elucidate the role of ovalbumin (OVA) on the hydrophobicity and potential response of galena in the presence of dithiophosphinate (DTPI). OVA was tested as environmentally friendly depressing ... -
Influence of interstitial filling on breakage kinetics of gypsum in ball mill
(Elsevier, 2011)Gypsum is an industrial material used in many applications such as building and chemical industry, fertilizer manufacture, medicine and dentistry. In these industries, there is need for finely ground gypsum. Energy consumption ... -
Interrelationships between the bond grindability with physicomechanical and chemical properties of coals
(Taylor and Francis, 2013)In this research, different techniques for the estimation of Bond grindability (Gbg) values of coals are studied. Data from ten sub-bituminous coals from Turkey are used by featuring physicomechanical (ISI, Is, and FD) and ... -
Investigation of breakage behavior of different mineralogical and morphological characteristic pumices
(2011)The objective of this study is to analyze dry grinding behavior of four different pumices in terms of Bond grindability value, selection and breakage parameters values. For this purpose, firstly, Bond grindability test ... -
Investigation of the breakage parameters of gypsum as dependent on interstitial filling in a laboratory ball mill
(Springer Nature, 2011)Gypsum is an industrial material used in many applications such as building and chemical industry, fertilizer manufacture, medicine and dentistry. In these industries, there is need for finely ground gypsum. Energy consumption ... -
An investigation on the effects of the ball filling on the breakage parameters of natural amorphous silica
(Elsevier B.V., 2016)The effects of ball filling on the selection (Si) and breakage functions (Bi,j) for the natural amorphous silica were investigated in this paper. At four levels (20%, 30%, 40% and 50%) of ball filling, the selection functions ... -
Li-doped fullerene pillared graphene nanocomposites for enhancing hydrogen storage: A computational study
(Elsevier, 2021)Hydrogen physisorption in lithium doped fullerene pillared graphene nanocomposites (Li-FPGNs) having tunable pore structures were examined under different temperature and pressure conditions via grand canonical Monte Carlo ...