Güncel Gönderiler: Makale Koleksiyonu
Toplam kayıt 109, listelenen: 101-109
-
Effect of attachment types and number of implants supporting mandibular overdentures on stress distribution: A computed tomography-based 3D finite element analysis
(Elsevier Ltd, 2015)The objective of this study was to calculate stresses in bone tissue surrounding uncoupled and splinted implants that are induced by a bite force applied to the mandible and to determine whether the number of mandibular ... -
An elastic-plastic stress analysis steel-reinforced thermoplastic composite cantilever beam
(2008)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ... -
Effect of grooved pin-fins in a rectangular channel on heat transfer augmentation and friction factor using Taguchi method
(Elsevier Ltd, 2016)In this study, the effect of both cylindrical grooved pin-fins (C-GPFs) and triangular grooved pin-fins (T-GPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally ... -
Velocity field and turbulence effects on heat transfer characteristics from surfaces with V-shaped ribs
(2012)The flow field of smooth surfaces and surfaces with V-shaped ribs (V-SR) was studied experimentally with a Laser-Doppler Anemometry (LDA) system. In addition, heat transfer characteristics were experimentally investigated. ... -
Experimental investigation of heat transfer in a channel with new winglet-type vortex generators
(Elsevier Ltd, 2014)Both new punched triangular vortex generators (PTVGs) and punched rectangular vortex generators (PRVGs) have been developed. Both the triangular and rectangular vortex generators were directly punched from the longitudinal ... -
Experimental and numerical investigation of geometry effects on multiple impinging air jets
(Elsevier Ltd, 2014)The effect of jet geometry on the flow and the heat transfer characteristics was investigated experimentally and numerically for elliptic and rectangular impinging jet arrays. Detailed heat transfer measurements over a ... -
Flow and heat transfer characteristics of transverse perforated ribs under impingement jets
(2013)An experimental study was conducted to investigate heat transfer and flow characteristics under impingement of a multiple circular jet array with perforated rib surfaces (PRS) and solid rib surfaces (SRS). Heat transfer ... -
Exergy destruction analysis of a gas turbine power plant
(Hitit Üniversitesi Fen Bilimleri Enstitüsü, 2018)According to the data released by “Republic of Turkey-the Ministry of Energy and Nat ural Resources”, by the end of July 2017, 34% of the electricity of Turkey was produced from natural gas. As it is compared to ... -
Failure analysis of graphene sheets with multiple Stone-Thrower-Wales defects using molecular mechanics based nonlinear finite element models
(Hitit Üniversitesi Fen Bilimleri Enstitüsü, 2018-06-09)Experimental studies show that Stone-Thrower-Wales (STW) defects generally exist in graphene sheets (GSs) and these defects considerably affect the fracture strength of GSs. Thus, prediction of failure modes of GSs with ...
