Yayıncı "Taylor and Francis Ltd." Makale Koleksiyonu için listeleme
Toplam kayıt 6, listelenen: 1-6
-
A comparative study on crashworthiness of thin-walled tubes with functionally graded thickness under oblique impact loadings
(Taylor and Francis Ltd., 2019)The main objective of this study is to investigate the effects of functionally graded thickness (FGT) patterns and cross-sectional shapes (i.e. circular, square and hexagonal) on crashworthiness performance of thin-walled ... -
Design analysis of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs by the taguchi method
(Taylor and Francis Ltd., 2016)In this work, the effects of the impingement plate geometry, Reynolds number, jet-plate distance-to-jet diameter ratio, and the jet diameter-to-rib height ratio on the impingement jets were investigated using the Taguchi ... -
Effect of heating position on thermal energy storage in cavity with/without open-cell metallic foams
(Taylor and Francis Ltd., 2016)Thermal energy storage systems inherently store heat at different heating positions. In other words, the heat storage performance changes depending on the heating positions. In this study, the effects of the heating surface ... -
Energy absorption of circular aluminium tubes with functionally graded thickness under axial impact loading
(Taylor and Francis Ltd., 2015)The main objective of this study is to investigate the effects of thickness-gradient patterns on energy absorption characteristics of aluminium-based circular tubes under axial impact loading. Functionally graded thickness ... -
Experimental investigation of heat transfer from different pin fin in a rectangular channel
(Taylor and Francis Ltd., 2018)In this study, the effect of both hexagonal pin fins (HPFs) and cylindrical pin fins (CPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally investigated. ... -
Impact response of sandwiches with open-cell casting metal foam and GFRP skins
(Taylor and Francis Ltd., 2016)The main advantage of using sandwich structures is their high strength, high energy absorbing capacity and high bending stiffness to weight ratio. Therefore, they are unique for the applications where the light-weight ...