Başlık için Makine Mühendisliği Bölümü listeleme
Toplam kayıt 135, listelenen: 27-46
-
Effect of grooved pin-fins in a rectangular channel on heat transfer augmentation and friction factor using Taguchi method
(Elsevier Ltd, 2016)In this study, the effect of both cylindrical grooved pin-fins (C-GPFs) and triangular grooved pin-fins (T-GPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally ... -
Effect of heating position on thermal energy storage in cavity with/without open-cell metallic foams
(Taylor and Francis Ltd., 2016)Thermal energy storage systems inherently store heat at different heating positions. In other words, the heat storage performance changes depending on the heating positions. In this study, the effects of the heating surface ... -
Effect of impactor shapes on the low velocity impact damage of sandwich composite plate: Experimental study and modelling
(Elsevier Ltd, 2016)An experimental and numerical analysis of the influence of impactor shapes on the low velocity impact performance of aluminium sandwich composite plates has been carried out. The aluminium composite panels were manufactured ... -
Effect of swirl generator inserted into a tube on exergy transfer: Decaying flow
(Taylor and Francis Inc., 2014)This study experimentally investigates the effect of conical injector type swirl generator inserts on heat and exergy transfer in a uniform heat flux tube for turbulence regime. One hundred twenty watts of heat are applied ... -
Effect of tooth profile modification on wear in internal gears
(IOP Publishing Ltd, 2018)Internal gears are often used in the automotive industry when two gears are required to rotate in the same direction. Tooth shapes, slippage speeds at the beginning and end of meshing are different according to the external ... -
Effects of flexural stiffness, axial velocity and internal support locations on translating beam's natural frequencies
(Trans Tech Publications, 2014)The aim of this paper is to examine the natural frequencies of beams for different flexural stiffness, internal simple support locations and axial moving speed. In the present investigation, the linear transverse vibrations ... -
Effects of holding force on the springback behavior of annealed aluminum plates
(Elsevier Ltd, 2016)Typical V-bending process was performed to investigate the effects of holding force on springback behavior of 1050-H14 aluminum alloy plates annealed at 120 °C for 20 minutes. Tests were conducted on a universal testing ... -
Effects of lithium doping on hydrogen storage properties of heat welded random CNT network structures
(Elsevier Ltd, 2016)This paper presents the effects of lithium doping on the hydrogen storage capability of heat welded random carbon nanotube (CNT) network structures having different cross-link densities at room temperature. Cluster based ... -
An elastic-plastic and residual stress analysis steel reinforced thermoplastic composite cantilever beam
(2010)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ... -
An elastic-plastic stress analysis of woven Ni-Cr reinforced thermoplastic composite cantilever beam
(2007)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by Ni-Cr steel fibers. The beam is loaded by a constant ... -
An elastic-plastic stress analysis steel-reinforced thermoplastic composite cantilever beam
(2008)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ... -
Elastoplastic stress analysis of functionally graded disc under internal pressure-complas XII
(2013)The study deals with elastoplastic stress analysis of a hollow disk made of functionally graded materials (FGMs) subjected to an internal pressure. The material properties of disc are assumed to vary radially according to ... -
Elektro-erozyon ile işlemede işleme haznesine uygulanan titreşimlerin işleme performansına etkilerinin incelenmesi
(2011)Bu çalısmada, elektro-erozyon ile islemede (EEİ), isleme kosullarında isleme haznesine uygulanan titresimlerin performans çıktıları (isparçası isleme hızı, elektrot asınma hızı, bağıl asınma ve isparçası yüzey pürüzlülüğü) ... -
Energy absorption of 2D auxetic structures fabricated by fused deposition modeling
(SPRINGER HEIDELBERG, 2023)Auxetic structures have become a very popular subject in recent years due to their interesting physical and mechanical properties such as light weight, energy absorption capability, and impact resistance. In this context, ... -
Energy absorption of circular aluminium tubes with functionally graded thickness under axial impact loading
(Taylor and Francis Ltd., 2015)The main objective of this study is to investigate the effects of thickness-gradient patterns on energy absorption characteristics of aluminium-based circular tubes under axial impact loading. Functionally graded thickness ... -
Energy absorption of thin-walled tubes enhanced by lattice structures
(Elsevier, 2019)Thin-walled structures filled or covered by various materials have been proposed for energy absorption applications in recent years. At this point, additive manufacturing technologies provide an unprecedented opportunity ... -
Energy and exergy analyses of hydrogen production by coal gasification
(Elsevier Ltd, 2017)In this study, we examine an integrated coal based gasification system developed for hydrogen production and power generation. The proposed plant consists of air separation unit, gasification unit, gas cooling and cleaning ... -
Energy and exergy analysis of an air conditioning system using the mixture of outdoor and return air
(2012)Energy and exergy analysis of the air conditioning systems employing the mixture of outdoor and return air (ACOR) are presented. The equations of heat transfer rate and exergy destruction are developed for ACOR according ... -
Energy and irreversibility analysis of a cascade refrigeration system for various refrigerant couples
(2010)This study deals with energy and irreversibility analysis of a cascade refrigeration system employing various refrigerant couples, namely R152a–R23, R290–R23, R507–R23, R234a–R23, R717–R23 and R404a–R23, using a computer ... -
Evaluation of the effects of surface treatments on different dental ceramic structures
(2013)The surface treatments applied to porcelain materials can be different overglaze methods, chemical interactions and polishing techniques. The aims of these methods are the most durable restoration and the smoothest surface. ...