Bölüm "Rektörlük" Teknik Bilimler Meslek Yüksekokulu için listeleme
Toplam kayıt 6, listelenen: 1-6
-
A comparative study for accuracy assessment of PPP technique using GPS and GLONASS in urban areas
(Elsevier B.V., 2015)In recent years, the usage of the Precise Point Positioning (PPP) has increased due to its ease of use, providing high accuracy as well as reducing the field operational costs by using only a single GNSS receiver. Moreover, ... -
Deniz uygulamalarında hassas nokta konumlama tekniğinin (PPP) kullanılabilirliği üzerine bir araştırma
(Harita Genel Müdürlüğü, 2015)Bu çalışmada, tek bir GNSS alıcısı ile toplanan veriden başka bir veriye ihtiyaç duymadan konum belirlemeyi mümkün kılan Hassas Nokta Konumlama (Precise Point Positioning-PPP) tekniğinin deniz uygulamalarında (dinamik ... -
Effect of hyper-plasticizer additive rates on the properties of polypropylene fibre tempered concretes
(Springer, 2018)In this study, effect of different rates of hyper-plasticizer additives on the physical and mechanical properties of polypropylene fibre tempered concretes was investigated. The factors of slump and compaction, which are ... -
Kinematic precise point positioning using GPS and GLONASS measurements in marine environments
(Elsevier B.V., 2017)The Precise Point Positioning (PPP) technique has received increased attention in recent years. When employing PPP, users need only a single GNSS receiver data to obtain a cm to dm accuracy level on a global datum, both ... -
Usability of GNSS technique for cadastral surveying
(Springer International Publishing, 2017)The population of the world, which increases rapidly at an average rate of 1.2% annually, has exceeded seven billion. However, despite the increase in population, 150,000,000 km2 terrestrial area, which composes the 29.2% ... -
Use of waste concrete in cement production
(Springer, 2018)Use of waste concrete in tempered cement production was examined in this study. Waste concretes were used in limestone-tempered cement production. In tempered cement production, 5, 10, 15, 20 and 28% milled waste concrete ...